PDA

View Full Version : Service Help


PansitBhoy
02-06-2006, 02:31 PM
Wassup SBN? need someone's expertise or anyone's help. i have 26k miles on my 03 r6 and on cold startups the idle is fine, but after the bike gets hot it starts to sputter then die. some say i need a valve service, but i cannot cough up $9bills (Berts) or $7bills (Hahm) for it. does anyone know where i can get da bike fixed or what type of service do i really need?

old wanderer
02-06-2006, 03:05 PM
Swing by Moomba and have Jimmy take a look at it...(When he's back from Laguna on Wed.).

I'll be thre either Wed or Thurs with my CBR for a bit of work.

Vtec44
02-06-2006, 03:12 PM
You can try changing the spark plugs and clean the carbs. :) S

D Duck
02-06-2006, 04:08 PM
You can try changing the spark plugs and clean the carbs. :) S

Its an FI bike.

Night Train
02-06-2006, 04:14 PM
It sounds too lean but then I know crap about FI. I would definitely get it to Moomba. Have you had the valves checked if so, when. 7 or 9 bills sounds too much for a valve adjustment. What gives?? :dunno

Earl
02-06-2006, 04:51 PM
Sounds like it needs a good major tune up including a valve adjustment.

I believe Yamahas are spec'd at 26K mile intervals for valve adjustments.

Vtec44
02-06-2006, 05:44 PM
Its an FI bike.

:doh, then your carbs should be spotless. :P

scriggities
02-06-2006, 07:24 PM
I know it sounds disgustingly simple, but my buddy had an R1 with similar problems around 15k. He threw some fuel injector cleaner into a tank of fresh gas and solved the problem immediately.

D Duck
02-06-2006, 07:42 PM
Wassup SBN? need someone's expertise or anyone's help. i have 26k miles on my 03 r6 and on cold startups the idle is fine, but after the bike gets hot it starts to sputter then die. some say i need a valve service, but i cannot cough up $9bills (Berts) or $7bills (Hahm) for it. does anyone know where i can get da bike fixed or what type of service do i really need?

well I dont know how the 3rd gen r6 is but if its anything like the past engines with a bucket and shim for the valve setup, at 26k miles it shouldnt need an adjustment or in the very least be so bad that it causes problems.

moomba
02-06-2006, 09:50 PM
Bring it by the shop and we'll have Jimmy test ride the bike & check it out to see what it's doing.

PansitBhoy
02-06-2006, 10:44 PM
da funny thing is i just had my baby serviced at Motorcycletech about a couple of months ago then i get dis crap! that's da last time i'll be going there!

moomba
02-06-2006, 11:00 PM
da funny thing is i just had my baby serviced at Motorcycletech about a couple of months ago then i get dis crap! that's da last time i'll be going there!

Where's Motorcycletech? I'm not familiar with them.

The Sauce
02-07-2006, 10:13 AM
Sell it. Buy a Honda.














:fawkdance


but yeah, +1 for going to Moomba and get that baby checked out.

PansitBhoy
02-07-2006, 10:52 AM
thanx for all da help!